We know the weather in Richmond can be unpredictable. That’s why when you need affordable air conditioning and heating service in Richmond, VA, you’ll want to call Loving Air. We’re local HVAC contractors serving Richmond. Our HVAC technicians work to keep you and your family comfortable in your home, so you don’t have to DIY an issue. We’re proud to provide budget-friendly services and get the job done right the first time. As a result, you won’t have to spend tons of money on multiple repairs. We offer a 100% satisfaction guarantee, so you can be confident that you’ll get top-notch services.
Our reputation as a trustworthy, affordable, and reliable heating and cooling company proceeds us. No matter whether you need residential or commercial services, we believe everyone should stay comfortable in their home or business. If you’re ready for high-quality installations, repairs, or tune-ups, call Loving Air today. We’ll provide you with excellent services. Let’s get started!
We recommend preventative heating tune-ups to keep your HVAC system in good order and to catch more costly repairs before they happen.Learn More
Is your heater on the fritz? Loving Air’s knowledge and affordable rates make us the top heater repair company in Fredericksburg.Learn More
Heat pumps are essential to the function of your HVAC unit. We install and repair heat pumps so your family can enjoy energy-efficient heat.Learn More
Whether you need your furnace repaired or replaced, Loving Air will be there to get your heating source up and running in no time.Learn More
Selecting a new heating unit can be daunting. Our experts will help you select the right make and model for your home, and install it at budget-friendly rates.Learn More
Programmable thermostats can help cut your energy bill and add an extra level of ease and comfort to you and your family’s life.Learn More
Ductless mini-split systems offer homeowners a cost-effective way to replace inefficient window AC units, space heaters, and so on.Learn More
If you need boiler maintenance, repairs, or installation services by the experts, you need Loving Air. We’ve got affordable HVAC services that will keep you cozy in your home.Learn More
Lack of cleaning, improper vent materials, or poor vent installation in dryer vents can lead to house fires.Learn More
Keep your family’s water warm and comfortable. Don’t waste money on your utility bill if you’re not getting warm water when bathing or washing your hands. We can help keep your water warm today!Learn More
$500 Off for One System Replacement.
$1500 Combined Off Two Systems Replacement.
I absolutely enjoyed my experience today with Adam! Loving has been doing our HVAC for 6months but I personally was always at work! I loved every moment of my experience with Adam while he provided us an estimate to replace our system! (Our dogs loved him too!)
Our tech James was awesome. Honest and professional. Great pricing. He took his time to provide top notch service. Would def use again!
Great and easy experience getting our older system checked out. James provided quality service and all the key details we needed.
At the end, when we were discussing best price and he said he could cut his own money he has allotted for advertising and that he would cut his fee to lower my out of pocket cost, I felt that I would not be able to move forward because I would always feel bad about receiving a lower cost/price at his direct expense and it was making feel guilty for something I have not even agreed upon.
James was great. He was very professional and still very friendly at the same time. James was very thorough with his inspection and equally thorough explaining what he found and also educating us on our system.
Response from Loving Air, Inc.:
Amy, thank you for the great review on James. He is a great technician and takes great care of all our customers.
Upon arrival spoke with customer and she showed me where indoor unit was. System was trying to turn on but a roll out switch was tripped. Got systems going and found heat exchanger is cracked. Took pictures and showed the mother. Blower is clear. Wires all tight. Coil is clean, got no hits on leaks. Spoke to customer and 5ey would like a price on replacement.called for a design consultant to come out. Adam is coming out Saturday at 8:30am.
Upon arrival spoke with customer and he explained the heat was running even tho it was not calling. Went in and made sure stat was off and found heat strips on one side still amping. Found heat sequencer gone bad. Explained to customer this is an issue that needs fixed and he said go ahead and replace it. Replaced sequencer and tested system. System is working on the indoor properly now, blower amped at 1.1amps. Heat kit turned on and off properly. Went outside, contacter and capacitor customer changed. Fan amped at .83, compressor amped at 5.48amps. Refrigerant levels where 145/369. System is defrosting good. System is working at this time of service.
Upon arrival spoke with customer and he has had no issues. Turned stat on. No filter in filter grill. Went to attic. Coil is clear, no hits for leaks. Checked heat exchanger and found no cracks in heat exchanger. Cleaned flame sensor. Gas pressures where 3.6IWC. Blower amped at 2.1amps. Blower had layer of dust so I dusted it in place. If we come back and still no filter it will be a charge next time. Let system run awhile and syste. Is working properly. Found no major issues but priced up some comfort options for customer. Also explained with systems age anything can happen to the system.
Upon arrival spoke with customers. They have had no issues. Explained what I would be doing today. Turned stat on, went to attic system. Coil and blower are clean. No leaks on coil. Wires all tight. Heat strips amped within specs. Drain safetyâ€™s are working. Unit is level and duct all looks tight. Went to outdoor unit. Contacter and capacitor checked within specs. Fan amped at .64 amps, compressor amped at 7.21amps. Refrigerant levels where 93/330, 35Â° outdoor temps. System went into defrost. System is working well at this time. Went over safetyâ€™s, dryer vent cleaning, and UV light with them. Customer did not want them done at this time but customer is very happy with the service.
Upon arrival spoke with customer and she explained what was going on with the system. Looked at stat and found stat face would not light up. Pulled stat off and had power. Tested stat on and off the wall a couple times and stat has gone bad. Explained to customer the stat has gone bad and I would be putting on a temporary stat for them. Went and put a 8448 stat on for customer so they will have heat till we can warranty a new ecobee stat for them. Tested system with new stat and let system run awhile. Whole system came on. Would like to further check system out when we put new warranty stat on for customer.
. Upon arrival spoke with the customer. Started upstairs. The filters are ok. Turned the thermostat to heat. Went to indoor unit. Inspected evaporator coil. The coil is clean and free of debris. Leak searched the coil and didnâ€™t find any leaks at this time. Inspected the blower housing and motor. The blower housing is clean and free of debris. The blower motor amped at 1.59. The electric heat strips amped at 20.98 and 21.21. Both are in range. Inspected low and high voltage wiring. All wiring is good and tight. Went to outdoor unit. The Refrigerant pressures were 125/453. Defrost is working properly. The compressor amped at 5.93. The condenser fan motor amped at .58. The capacitor checked out in range. The contactor is clean and free of pitting. Inspected low and high voltage wiring on outdoor. All wiring is good and tight. The disconnect is working properly. Recommend surge protector for outdoor. The coil is clean. The system is working properly at this time. Crawlspace. The filt
The expansion tank is in good condition. The circulator pump is working properly and amps are 1.48 in correct range per manufacturer specifications. Water temperature is 136-149 with 13.6 psi. The fan and inducer combined amps are 3.01 in correct range per manufacturer specifications. All radiators are free of air and are receiving proper flow of hot water. All wires are tight and in good condition. All joints and unions are tight and no water is leaking at this time. The piping is properly secured. The pressure relief valve is in good condition. The system is working properly at this time. The customer declined recommendations at this time.
Upon arrival spoke with the customer. No issues at this time. We walked to stat and turned system on. Found filter was dirty and customer will be replacing today. Went downstairs and pulled doors off unit. Coil is clean with no leaks at this time. Blower had to be brushed off in place but is now clear. Wires are all tight. Blower capacitor checked out at 10mfd. Cleaned flame sensor. Checked heat exchanger with camera and it is clean and showing no signs of cracks at this time. Put system back together and turned it on. Gas pressures where 3.4IWC per manufacturing specs. Let system run awhile and tested safetyâ€™s and they are working at this time. System over all is working well. Priced up water heater flush and dryer vent cleaning, home owner is not here to go over with at this time, only the tenant.
installed a new system everything working properly
Upon arrival shut power off to unit. Removed control board and put new in place. Wired board up. Cleaned flame sensor, and put on gas tester. Turned system on and started system, gas pressures where 9.5IWC, natural gas, I got it back down to 3.5IWC. blower amped at 1.5amps. Blower is clean. Let system run awhile, got no hits for carbon monoxide. Heat exchanger checked out good, no cracks. All wires nice and tight. Showed customer system is working. Spoke to customer and he approved doing a water heater flush. Flushed water heater and showed customer the dirt/minerals that where built up in the water. Water heater is working good. System is ready for the winter.